How to Add LED Display
NOTE: Before adding, make sure that the LED display’s IP address is on the same subnet as the VAISense device.
1. Navigate to the IoT Devices section.
2. Click Add Device, then select LED Display from the list.
3. Fill in the required parameters in the provided fields.
| Name | Name of the LED Display |
| Location | The physical or logical location of the LED display (e.g., "Main Entrance" or "Office"). |
| MxN | The grid layout configuration of the LED display. Supported formats include 3x2 and 2x2. |
| IP Address | The network IP address assigned to the LED display device. |
4. Once the required information is entered, a list of associated sensors will appear.
Click Add to complete the setup and successfully register the LED display.