How to add Cameras with Discovery
Here is a link to a helpful video on this process.
VAISense Security system employs ONVIF Profile S protocol to scan the local network, identifying available cameras not yet connected to the system as well as showing all available cameras.
If a camera has multiple channels, and you have already configured one channel, you can configure the other channel by selecting “All Cameras” and select your configured camera to add another channel.
To add a camera to the system, navigate to the settings, and select "Add Camera". Then select a camera description in the Camera Discovery list.
Enter the parameters to trigger the camera and connect to the VAISense Security system.
Parameters Definition (Camera Add)
| Name | Define a name for the selected camera, to be displayed on the VAISense Security system. |
| Brand | Select the system supported camera brand. Current NVR supported brands include ONVIF, Hikvision, Dahua, and Axis. |
| Model | Camera model name. |
| IP | Connected camera IP address. |
| Port | Connected camera IP Port (default value). |
| Login Account | Specify the login account that was used for the camera setup. |
| Password | Specify the associated password that was used during camera setup. |
| Test Connection | Test the camera connection to make sure it has been properly installed using the parameters defined in the previous steps. |
You can then set the stream sources here or decide to edit them later. For more details about Stream Source, refer to What are stream sources?